Advertisement
You are in display mode when the time is displayed on the
display (1) and the colon between the hour and minutes
display is flashing. The control buttons have the following
functions in display mode:
2 "Up" button
raises the sun protection.
3 "Stop" button
stops a move command.
4 "Down" button
lowers the sun protection.
5 Function buttons:
button
: Switches the time switch control on and off
button
: Switches the dawn/dusk control on and off
button
: Display of the last cause
6, 7 "Back", "Forwards" button (
can be changed in setting mode using these buttons.
No function in display mode.
8 Button
: This button takes you into setting mode.
[Menu]
Once you are in this mode, the operating buttons have
different functions.
9 Display of the next switch time when another later time
has been set for the same day
Settings
To change the settings, you need to change to setting
mode; to do this press the
[Menu] button.
ber is displayed next to the text (Set). The
menu) and
(next menu) buttons can be used to display
the menus in sequence. Values that can be changed are
always displayed flashing. You can then change the value
using the
buttons or
. If you want to save your settings,
press the
button and your settings will stop flashing. If
you want to exit setting mode, press the
time switch will then return to display mode.
Setting the time switch control
For the time switch control settings, the preselection of
the weekday is very important. Here you specify whether
the setting is changed for a specific day or whether the
entire weekly program is changed. First you need to select
in menu 01 the day(s) for which you want to make the
setting. Select using the
button or
set will be flashing) and confirm with the
stops flashing). Set the hours in menu 02 and the minutes
in menu 03, for the time at which the curtain is to be low-
ered, and confirm each selection using the
time at which the curtain is to be raised is set in menus
04 and 05. If you do not want to set up and down times,
set - -. To carry out settings for the remaining days, start
back at menu 01.If you have selected a block consisting of
multiple days, and u:u is displayed when setting the times,
this indicates that different times are currently stored for
those days. The random function is switched on and off for
all times in the time switch control in menu 06.
With (on), the set times are changed each day
by +x/ - 30 min.
890214_b•en•07.11.2011
All manuals and user guides at all-guides.com
Setting the current time / date
Set the current time and date in menus 07 to 12. (On) in
menu 9 goes to the automatic conversion of the clock for
summer and winter times.
Setting the runtime
The runtime after which the curtain stops is set in menu 13
(max. 300 sec).
Setting the dawn/dusk control
In menu 15 you need to enter your location for the dawn/
dusk control using a three-digit code which the WAREMA
Timer uses to calculate the times for dawn/dusk. For Ger-
many, the first digit is 0, and the other digits are the first
two digits of your postal code (e.g.: Würzburg PLZ 97070
→ 097). For other countries, the number can be found in
the astro list. To do this, find the town closest to your loca-
): The menu options
tion. The dawn/dusk control delay can be set on menu 16.
Here you can enter by how many minutes earlier or later
than the sunset time calculated you want to lower your cur-
tain (+ / - 60 min). For example, if you set the value "-30",
the curtain will be lowered 30 min before sunset.
Loading the factory settings
You can load the factory settings in menu 17. All param-
eters are overwritten with the factory settings following
confirmation.
Overview of the setting menus
The menu num-
(previous
button. The
[Menu]
button (the days
button (display
button. The
Maintenance
There are no parts within the device that require
maintenance.
Menu
Function
01
Time switch control: Select
weekday, weekend, working
week or calendar week
02
Time switch control: Lower sun
protection switching time
03
Time switch control: Lower sun
protection switching time
04
Time switch control: Raise sun
protection switching time
05
Time switch control: Raise sun
protection switching time
06
Time switch control: Random up
and down switching times
07
Set clock
08
Set clock
09
Activate/deactivate automatic
summer/winter time switching
10
Set calendar day
11
Set month
12
Set year
13
Run time
14
Software version
15
Location for dawn/dusk control
16
Dawn/dusk control delay
17
Load factory settings
We reserve the right to carry out improvements
Possible
Factory
settings
setting
Weekday,
---
weekend,
working week
or calendar
week
Hour
22
Minute
00
Hour
8
Minute
00
ON/OFF
OFF
Hours
Minutes
ON/OFF
ON
1 - 31
1
1 - 12
1
2001 - 2099
2007
0 – 300 sec
60 sec
---
---
---
060
+/- 60 min
---
cLr
---
3
Advertisement
