Toro Z Master Professional 5000 Series Setup Instructions page 16

Dealer Initial Customer Initial
Note:
When you, the dealer representative, have finished delivering the machine to the customer, sign and
date in the space provide below and keep a copy of this page for dealer records. Also, the dealer must remind
the customer to use a full-width trailer ramp to load the machine.
Signature:
Signature:
•
Z Stand® (if applicable)
•
Adjustable seat
•
Hydraulic-bypass valves
•
Rollover Protection System (ROPS)
•
Deck-flow baffle
Refer to the Operator's Manual to point out safety procedures, operation, and
maintenance procedures.
Review the warranty statement as shown in the Operator's Manual.
Describe the post sale service procedures for your store.
Assist the customer in filling out and mailing the registration card or register online at
www.Toro.com
Make sure that the customer receives the Operator's Manual, Engine Owner's Manual,
Set Up Instructions, and operator training material.
Make sure the customer knows the Parts Catalog is available at www.Toro.com.
Assist the customer in loading the machine.
Date:
Date:
16
Check Procedure