LG 43LX770H Owner's Manual page 13

When you do not use LG's wall mount bracket,
use a wall mount bracket where the device is
adequately secured to the wall with enough space
to allow connectivity to external devices. If you are
using a non-adjustable mount, attach the mount
to the wall. Attach the cables to the TV first, then
attach the TV to the mount.
1 0 c m
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
40/43LX770H
Model
40/43LX774H
VESA (A x B) 200 x 200
Standard screw
M6
Number of screws
4
Wall mount bracket
LSW240B
(optional)
MSW240
65LX770H
Model
65UX970H
VESA (A x B)
300 x 300
Standard screw
M6
Number of screws 4
Wall mount bracket
LSW350B
(optional)
B
10 cm
(4 in c h e s )
1 0 c m
10 cm
49/55LX770H
49/55LX774H
49/55UX970H
300 x 300
M6
4
LSW350B
MSW240
79UX970H
600 x 400
M8
4
LSW640B
A
CAUTION
• Disconnect the power before moving or
installing the TV. Otherwise electric shock may
occur.
• Remove the stand before installing the TV on a
wall mount by performing the stand attachment
in reverse.
• If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel. When using a
third-party wall mount, it is not covered by the
warranty.
• Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
• Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NOTE
• Use the screws that are listed in the VESA
standard screw specifications.
• The wall mount kit includes an installation
manual and necessary parts.
• The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
• The length of screws may differ depending upon
the wall mount. Make sure to use the proper
length.
• For more information, refer to the manual
supplied with the wall mount.
• When using the wall mounting bracket, apply
the adhesive protective label to cover the
unused stand opening(s). This will prevent the
accumulation of dust and dirt. (Do this only
when the labels are provided with your model.)
Provided Item
Adhesive protective label
• Depending upon the shape of the stand, use a
flat tool to remove the stand cover as illustrated
below. (e.g., a flat screwdriver) (For 79UX970H)
13