Table of Contents
Advertisement
Releasing the Inner Rails
Releasing the Inner Rails from the Outer Rails
1. Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
2. Press the locking tab down to release the inner rail.
3. Fully extend the inner rail.
4. repeat steps 1-3 for the second outer rail.
Figure 2-2. Extending and Releasing the Inner Rails
Warning: stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing. Failure to
stabilize the rack can cause the rack to tip over.
1
2
3
4
21
Chapter 2: Server Installation
Advertisement
Table of Contents
