Table of Contents
Advertisement
5. Voice guide setup screen will appear. Use [
6. Auto software update setup screen will appear. Use [
7. Home network setup screen will appear. Use [
• If you select "Set up now", the network setup screen will appear. See step 7 below.
• If you select "Skip", the home menu screen will appear.
8. Network setup screen will appear. Use [
Please select your preferred
network setup mode.
This unit can connect to the Internet
or Home Network using an Ethernet
cable connection only, which enables
the following functions:
- Home Network Media Browser
- BD-Live
- Auto software update
Back
Cancel
• If you select "Auto setup", network setting will automatically be performed.
• If you select "Manual setup", refer to step 6 - 13 in "Manual setup" on page 44.
C How to reset the OSD language
You can reset the OSD language if you selected the wrong language.
1. Press [HOME] to display the home menu.
2. Use [
• This item is "Setup" (English) / "Installation" (French) / "Instalación" (Spanish).
• From here on, please select one of the following items you can find on screen.
3. Use [
] to select "Preferences" (English) / "Préférences" (French) / "Preferencias" (Spanish), then press
[OK].
4. Use [
] to select "Menu language" (English) / "Langage du menu" (French) / "Menú Idioma" (Spanish),
then press [OK].
5. Use [
] to select your desired language, then press [OK].
6. If the items that were set are displayed in your desired language, then press [HOME] to exit.
EN
Auto Setup
Manual Setup
1 4
] to select "
", then press [OK].
] to select "On" or "Off", then press [OK].
] to select "On" or "Off", then press [OK].
] to select "Set up now" or "Skip", then press [OK].
] to select "Auto setup" or "Manual setup", then press [OK].
19
Advertisement
Table of Contents
