Hisense H10B Series Quick Start Manual page 9

Attach the Wall Mount Bracket (not included)
Before you begin the third-party manufacturer instructions, be
sure to do the following things:
1. Place the TV face down on a clean, safe and cushioned surface
attached it.
2. Remove the TV stand if you already.
3. Place the spacers (not included) in the corresponding bracket
holes.
Spacer
(not provided)
CAUTION:
• When you attach the mount, be sure to use the spacers
(provided by the third-party manufacturer) between the TV
and the bracket.
7
Screw
(not provided)
Bracket
(not provided)
• To prevent internal damage to the TV and ensure it is
mounted securely, be sure to use fixing screws (not
provided) that are 9.5 - 11.5 mm in length when measured
from the attaching surface of the mounting hook.
9.5 - 11.5 mm
Rear cover of the TV
Wall mount hole pattern
VESA (mm)
Wall mount screw size (mm)
Follow instructions provided with the Wall mount bracket.
To complete the installation, please contact the wall-mount
manufacturer or the retailer from which you purchased the TV.
The selected screws are 9.5 - 11.5 mm in length when
measured from the attaching surface of the rear cover. The
diameter and length of the screws differ depending on the
Wallmount bracket model.
NOTE: The diameter and length of the screws differ depending
on the wall mount bracket model.
Wall mount bracket
Screw
Spacer
400 × 400
M6