Setting Up The Monitor Set; Attaching The Stand Base; Detaching The Stand Base - LG E1951C Owner's Manual

6
ASSEMBLING AND PREPARING

setting Up the Monitor set

Attaching the stand Base

1
Place the monitor's screen face down.
CAUtIon
To protect the screen from scratches, cover
y
the surface with a soft cloth.
2
Put the stand Body on the set and use the
screws to fix.
stand Body
3
Check the position (at the front and rear) of
the stand body, then mount the stand base on
the stand body as shown in the figure.
stand Body
stand Base
CAUtIon
Push stand base tightly before turn the
y
screw in.
4
Using a coin, turn the screw clockwise to se-
cure the stand base.
stand Base

Detaching the stand base

1
Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a coin, turn the screw in the stand base
counterclockwise. Detach the stand base from
the stand body.
stand Body
stand Base
CAUtIon
This illustration depicts the general type of
y
connection. Your monitor may differ from the
items shown in the picture.
Do not carry the product upside down
y
holding only the stand base. The product
may fall and get damaged or injure your
foot.