Page 1
OWNER’S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODEL E1942CW E1945CW www.lg.com...
Contents AsseMBLInG AnD PRePAR- tRoUBLesHootInG Unpacking Parts and buttons sPeCIFICAtIons Setting up the Monitor set E1942CW - Attaching the Stand Base E1945CW - Detaching the Stand Base Preset Modes (Resolution) - Mounting on a table Indicator - Using the cable holder...
ASSEMBLING AND PREPARING AsseMBLInG AnD PRePARInG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
ASSEMBLING AND PREPARING Parts and buttons Power Indicator Lighting on: turned on Lighting off: turned off (Power Button) Button (See p.11) Connection panel (See p.9)
ASSEMBLING AND PREPARING setting up the Monitor set Detaching the stand Base Attaching the stand Base Place the Monitor set with the screen side down on a flat and cushioned surface. Place the Monitor set with the screen side down on a flat and cushioned surface. Pull out the stand Body and stand Base from the monitor set.
ASSEMBLING AND PREPARING Mounting on a table Press (Power) button on the bottom switch panel to turn the power on. Lift and tilt the Monitor set into its upright CAUtIon position on a table. Leave a 10 cm (minimum) space from the wall Unplug the power cord before moving the for proper ventilation.
Page 7
ASSEMBLING AND PREPARING wARnInG Using the Kensington security system The Kensington security system connector is When you adjust the angle, do not hold the located at the back of the Monitor set. For more bottom of the Monitor set frame as shown on information of installation and using, refer to the the following illustration, as may injure your fingers.
If you use improper screw, the product might be length. damaged and drop from mounted position. In For more information, refer to the this case, LG Electronics is not responsible for instructions supplied with the wall mount. VESA compatible. Please use VESA standard as below.
USING THE MONITOR SET UsInG tHe MonItoR set Connecting to a PC note Your Monitor set supports Plug & Play*. When using a D-Sub signal input cable *Plug & Play: A PC recognizes a connected connector for Macintosh device that users connect to a PC and turn on, without device configuration or user intervention.
Page 10
USING THE MONITOR SET Self Image Setting Function CAUtIon Press the power button on the bottom panel to turn the power on. When monitor power is turned Connect the signal on, the "self Image setting" Function is executed input cable and tighten automatically.
When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) the best display mode E1942CW/E1945CW:1440 x 900 eXIt Exit the OSD(On Screen Display). Turns the power on or off.
CUSTOMIZING SETTINGS Customizing settings Menu settings Press MenU button on the bottom of the Monitor set to display the MenU OSD. Set the options by pressing the ◄ or ► or ▼ buttons. Select the "neXt MenU" button to enter the more option settings.
CUSTOMIZING SETTINGS PICtURe Press MenU button on the bottom of the Monitor set to display the MenU OSD. Select the "neXt MenU" button to enter the more option settings. Enter to PICtURe by pressing the ▼ button. Set the options by pressing the ◄ or ► or ▼ buttons.
CUSTOMIZING SETTINGS CoLoR Press MenU button on the bottom of the Monitor set to display the MenU OSD. Select the "neXt MenU" button to enter the more option settings. Select CoLoR by pressing the ► button. Enter to CoLoR by pressing the ▼ button. Set the options by pressing the ◄...
CUSTOMIZING SETTINGS DIsPLAY Press MenU button on the bottom of the Monitor set to display the MenU OSD. Select the "neXt MenU" button to enter the more option settings. Select DIsPLAY by pressing the ► button. Enter to DIsPLAY by pressing the ▼ button. Set the options by pressing the ◄...
CUSTOMIZING SETTINGS otHeRs Press MenU button on the bottom of the Monitor set to display the MenU OSD. Select the "neXt MenU" button to enter the more option settings. Select otHeRs by pressing the ► button. Enter to otHeRs by pressing the ▼ button. Set the options by pressing the ◄...
Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG calculated these values by using “broadcast video signal” (including broadcast video: IEC 62087) SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING...
CUSTOMIZING SETTINGS PICtURe MoDe setting Press MoDe button on the bottom of the Monitor set to display the PICtURe MoDe OSD . Set the options by pressing the ◄ or ► or ▼ buttons. Select eXIt to leave the OSD menu. Each option is explained below.
TROUBLESHOOTING tRoUBLesHootInG Check the following before calling for service. no image appears y Check and see if the power cord is connected properly to the power Is the power cord of the display connected? outlet. y Press the Power button. Is the power indicator light on? Is the power on and the power y Adjust the brightness and the contrast.
Page 20
Be sure to install the display driver from the display driver CD (or driver? diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function.
SPECIFICATIONS sPeCIFICAtIons e1942Cw Display screen type 48.2 cm (19 inch) Flat Panel Active matrix-TFT LCDAnti- Glare coating Visible diagonal size: 48.2 cm Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch) sync Input Horizontal Frequency 30 kHz to 61 kHz (Automatic)
SPECIFICATIONS sPeCIFICAtIons e1945Cw Display screen type 48.2 cm (19 inch) Flat Panel Active matrix-TFT LCDAnti- Glare coating Visible diagonal size: 48.2 cm Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch) sync Input Horizontal Frequency 30 kHz to 61 kHz (Automatic) Vertical Frequency 56 Hz to 75 Hz (D-SUB) Input Form...
PROPER POSTURE PRoPeR PostURe Proper posture for using the Monitor set. Adjust the Adjust the location of the Monitor set and Monitor set to avoid it your posture to reflecting light. allow you to view images at the optimal viewing angle.
Page 25
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible ENERGY STAR is a set of power-saving place for future reference. guidelines issued by the U.S.Environmental The model and serial number of the SET is Protection Agency(EPA).