Vista Simplicity ROLLER SHADES Quick Start Manual

Simplicity
Rechargeable Motorization
ROLLER SHADES | Quick Start Guide
Your shade has come pre-programmed from the factory. Follow these easy steps to get started.
1. Mount the shade. 2. Your shade is now ready!
Select the programmed channel and use the
UP and DOWN arrows to operate the shade.
Setting/Using a Favorite Position
Make sure there is only one shade programmed to the channel when setting a Favorite position.
If more than one shade is set, please see UNLINK A SHADE in the Simplicity guide at vistaproducts.com/guides.
2. To save the Favorite position, hold the 3. Press the STOP/FAVORITE button to
1. Using the UP and DOWN arrows,
move the shade to the desired LIMIT button and hold the UP button at the move the shade to the set Favorite position.
Favorite position. same time. Release after the shade jogs once. Make sure shade is fully stopped
NOTE:
before using the Favorite position.
For more in depth motorization programming instructions, please visit vistaproducts.com/guides