Before Setting Surface Controls - Frigidaire FFEC2605L Use & Care Manual

ceramic glass cooktop
The ceramic cooktop has radiant surface elements
located below the surface of the glass. The design of
the ceramic cooktop outlines the area of the surface
element underneath. make sure the diameter of the
pan matches the diameter of the element outline on the
cooktop.
Heat is transferred up through the surface of the cooktop
to the cookware. Only flat-bottom cookware should
be used. The type and size of cookware, the number
of surface elements in use and their settings are all
factors that will affect the amount of heat that will
spread to areas beyond the surface elements. The areas
surrounding the elements may become hot enough to
cause burns.
caution
The cooktop should not be used as a cutting board or
work surface.
Dropping heavy or hard objects on the cooktop may crack it.
Pans with rough bottoms may scratch the cooktop surface.
Placing foods directly on the smoothtop surface
(without cooking utensil) is not recommended as
difficult cleaning will result and foods may smoke and
cause a potential fire hazard.
Never use the griddle or similar cooking sheet on the
ceramic glass cooktop.

note
Please read detailed instructions for ceramic glass
cooktop cleaning in the general care & cleaning
section and Before You call checklist section of this
Use and Care Guide.

BeFore setting surFace controls

(some models)
about the radiant surface elements
The element temperature rises gradually and evenly.
As the temperature rises, the element will glow red. To
maintain the selected setting, the element will cycle ON
and OFF. The heating element retains enough heat to
provide a uniform and consistent heat during the OFF
cycle. For efficient cooking, turn OFF the element several
minutes before cooking is complete. This will allow
residual heat to complete the cooking process.
types of the heating elements used
Your cooktop is equipped with radiant surface radiant
elements with different wattage ratings. The ability to
heat food quicker and in larger volumes increases as the
element wattage increases.
types of heating units may be found under the ceramic
glass cooktop:
– Regular (single coil) radiant elements of various
diameters or shapes.
– Expandable type (double circuits) radiant elements of
various diameters or shapes.
– Bridge Expandable type (triple circuits) radiant
elements of various diameters or shapes.

note
Due to the high intensity of heat generated by the
surface elements, the glass surface will turn green
when the element will be turned off. This phenomenon
is normal and the glass will come back to its original
white color after it has completely cooled down. (White
glass cooktops only).
Depending on model, three
7