Table of Contents
Advertisement
8 Before calling after-sales
service
Errors
Your appliance will warn you if the tem-
peratures for the appliance and freezer
are at improper levels or if a problem
occurs with the appliance. Warning
codes are displayed in the freezer and
refrigerator indicators.
ERROR
TYPE MEANING
Sensor
E01
warning
Sensor
E02
warning
Sensor
E03
warning
Sensor
E06
warning
Sensor
E07
warning
Low
E08
Voltage
Warning
Freezer
compart-
E09
ment is
not cold
enough
WHY
Call Service for
assistance as
soon as possible.
Call Service for
assistance as
soon as possible.
Call Service for
assistance as
soon as possible.
Call Service for
assistance as
soon as possible.
Call Service for
assistance as
soon as possible.
--This is not a device failure, this error helps to prevent dam-
Power supply
ages to the compressor.
to the device
--The voltage needs to be increased back to required levels
has dropped to
If this warning continues an authorised technician needs to
below 170 V.
be contacted.
1. Set the freezer temperature to a colder value or set Super
Freeze. This should remove the error code once the required
temperature has been reached. Keep doors closed to im-
prove time taken to reach the correct temperature.
2. Remove any products which have thawed/defrosted dur-
Likely to occur
ing this error. They can be used within a short period of time.
after long term
power failure.
3. Do not add any fresh produce to the freezer compartment
until the correct temperature has been reached and the error
is no longer.
If this warning continues an authorised technician needs to
be contacted.
smeg-tr.com
WHAT TO DO
29
Advertisement
Table of Contents
