JVC KD-R921BTEY Instructions Manual page 7

When you press or hold the following button(s)...
Remote
Main unit
controller
—
SRC
SOURCE
VOL – / + Adjusts the volume level.
Control dial
(turn)
—
Control dial
(press)
—
—
T/P BACK —
SOUND EQ SOUND
DISP —
BRIGHTNESS —
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Victor Company of Japan, Limited (JVC) is under license. Other trademarks and trade
names are those of their respective owners.
• Turns on.
• Turns off [Hold].
Selects the available sources (if the power is turned on).
• If the source is ready, playback also starts.
Selects items.
Mutes the sound or pauses during playback.
• Press the button again to cancel muting or resume playback.
Confirms selection.
• Enters "HF (hands-free) Menu" screen (page 15) or answers
incoming call when the unit rings. (page 17)
• Ends a call [Hold].
• Activates/deactivates TA Standby Reception. (page 9)
• Enters PTY Searching mode [Hold]. (page 9)
• Selects the controlling terminal of an iPod/iPhone [Hold]. (page 20)
• Returns to the previous menu.
Selects the sound mode.
• Hold the SOUND EQ button on the main unit to enter "My Sound
EQ Set" screen directly. (page 23)
• Changes the display information.
• Scrolls the display information [Hold].
Enters <Day Brightness> or <Night Brightness> menu directly.
(page 28)
General operation
ENGLISH 7