Cleaning; Cleaning The Engine And Exhaust System Area; Cleaning The Machine And Mower Deck; Disposing Of Waste - Toro Z Master Professional 7500-D Series Operator's Manual

Cleaning

Cleaning the Engine and
Exhaust System Area
Service Interval: Before each use or daily—Clean the
engine and exhaust system area.
Important:
Do not use water to clean the engine.
Use low-pressure compressed air. See the engine
owner's manual.
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Clean around the flywheel, cylinder head,
injectors, and injector pump.
4. Clean all debris from the exhaust system area.
5. Wipe up any excessive grease or oil around the
engine and exhaust area.
Cleaning the Machine and
Mower Deck
Service Interval: Before each use or daily
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Clean off any oil, debris, or grass build-up on
the machine and mower deck, especially under
the deck-belt shields, around the fuel tank, and
around the engine and exhaust area.
4. Raise the mower deck to the T
position.
5. Clean out any grass build-up from the underside
of deck.

Disposing of Waste

Engine oil, batteries, hydraulic fluid, and engine
coolant are pollutants to the environment. Dispose of
these according to your state and local regulations.
RANSPORT
61