Preliminary Inspection - ILVE Majestic AM70 Use And Maintenance Installation Manual

Table of Contents

Advertisement

INSTALLATION
PRELIMINARY
INSPECTION
After opening the package, please inspect the equipment
for any possible damage that could have occurred during
transport. If the product is damaged, please take note of
the data printed on the product label (Fig. 3.) and promptly
notify the data to your Supplier.
TRANSPORT
The transportation, loading and unloading of the product
should be performed by personnel wearing all the neces-
sary protections (Fig. 1.). When handling the equipment,
implement all the necessary precautions to avoid damage
to the same or to people and property, complying with the
instructions found on the packaging.
When handling the equipment, always use clean
cotton gloves to avoid fingerprints.
FIRST-USE PREPARATION
After the hood installation, please remove the protective
film and carefully clean the external surface (Fig. 2.).
Please
note that the use of acid-based cleansers could da-
mage the hood surface, so use a neutral or a ste-
el-specific
cleanser only.
All packaging and the protective film must be
disposed of in accordance with the regulations of the
country of use. Always make sure that nothing is
disposed of in the environment.
Packaging materials may be potentially dangerous
for children and animals.
HOW TO READ PRODUCT LABEL
The product label is located inside the hood,
usually attached on its bottom, being visible
after the removal of the anti-grease filters. The
label shows essential data and information
about the product regarding installation,
customer service and warranty-related repair,
as well as instructions to determine the correct
spare parts for the specific model.
Please do not remove, damage or alter in any
way the product label, since this could
impede the Manufacturer from identifying the
product in case of need.
Fig. 3.
Fig. 2.
Nome
commerciale
della cappa
AM90/SS
Motor : 1000 m3/h
Voltage: 220/230V 50Hz
Lamps: Led 3x1,2 W
Max Power: 710W
Serial n°: CA470079
A Max :
AM90/SS
Numero di serie
Tipo illuminazione
Tipo motore
29
Codice modello
Tensione alimentazione
Potenza totale
20/11
INSTALLER
Fig. 1.

Advertisement

Table of Contents
loading

Table of Contents