Greenheck EHH-401 Installation, Operation And Maintenance Manual page 2

INSTALLATION GUIDELINES
Step 1
Units that are to be field stacked will be shipped with alignment
plate(s) to be field installed. Remove the appropriate amount of
blade screws that hold the blade nearest the splice joint of the
mating section (reference model details).
EHH-401
EHH-501, EHH-501X
Our Commitment
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Product warranties can be found online at Greenheck.com, either on the specific product page or in the literature
section of the website at Greenheck.com/Resources/Library/Literature.
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: gfcinfo@greenheck.com • Website: www.greenheck.com
2 482877 • Alignment Plate Installation, Rev. 2, January 2019
Step 2
Stack the sections together.
Step 3
Attach plates by re-installing blade screws through alignment
plate(s), through jambs, and into screw bosses that are extruded
in blades.
EHH-601
EHH-701
Copyright 2019 © Greenheck Fan Corporation