6403 And Lt 9403 Passive Or Bi-Amp Loudspeaker Configuration - Bose Panaray LT 6403 Manual

LT 6403 and LT 9403 Passive or Bi-amp Loudspeaker Configuration
Note: The procedure below does not apply to the Panaray LT 6400 and LT 9400 speakers.
®
The LT 6403 and LT 9403 loudspeaker's configuration can be changed internally to operate in
either passive or bi-amped mode by changing the position of a jumpered plug on the input panel
PCB. You simply move the jumpered plug from one board connector to another. Refer to the
steps below.
1. Remove the rear connector plate.
2. Remove the connector from the passive
position.
3. Place in the Bi-amped position.
28