Table of Contents
Advertisement
Sound Setup
Sound Setup Operation
The following steps 1 to 5 are common operations to each
"Setting item" of Sound Setup. Refer to each section for details.
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [Sound].
The Sound Setup screen appears.
3
Select the desired item.
Setting items: Balance/Fader/Subwoofer
1
EQ Presets
*
/ Parametric EQ
Time Correction
Source Volume Setup
1
*
These items cannot be adjusted when External AP is set to On,
refer to "Setting the External Audio Processor On/Off"
(page 42).
2
*
This item cannot be adjusted when Optical is set to On, refer to
"Setting the Digital Output" (page 42).
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [
] to return to the previous screen.
• Immediately after changing the Sound Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to "Selecting an
Item in a List" (page 28).
• When BASS ENGINE SQ mode is selected or TuneIt is launched,
some setting items are not adjustable. Refer to "BASS ENGINE SQ
mode" (page 23)/"Applying TuneIt" (page 24).
1
*
/ Media Xpander
*
1
*
/
1
1
1
*
/ X-OVER
*
/ Defeat
*
/ Volume /
2
*
Setting the Balance/Fader/Subwoofer
[Balance/Fader/Subwoofer] is selected on the Sound setup menu in
step 3. Refer to "Sound Setup Operation" (page 43).
Setting the Balance/Fader
Touch the desired point within the image area. Or touch
[
] [
] [
] [
Balance: L15 to R15
Fader: F15 to R15
Rear Speaker Setting
You can set the rear speaker output to "Off".
Setting item: Rear Speaker
Setting contents: On (Initial setting) / Off
• Note that if you select "Off" when the Rear Speaker Position in Car
Specific Sound Setup is set to "Rear Deck" or "Rear Door/Panel",
the setting in Car Specific Sound Setup will be cancelled.
Turning Subwoofer ON/OFF
If an optional subwoofer is connected to the unit, make the following
1
/
setting.
Setting item: SubW.
Setting contents: On / Off (Initial setting)
• Note that if you select "Off" when Subwoofer Installed in Car
Specific Sound Setup is set to "Yes", the setting in Car Specific
Sound Setup will be cancelled.
Adjusting the Subwoofer Level
] to
You can set the Subwoofer level when a Subwoofer is connected.
Setting item: SubW. LEVEL
Setting contents: 0 to 15 (Initial setting: 0)
• If the Subwoofer setting is "Off", the setting cannot be set.
Setting the Subwoofer Phase
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item: SubW. Phase
Setting contents: 0° (Initial setting) / 180°
• If the Subwoofer setting is "Off", the setting cannot be set.
Image area
].
43
-EN
Advertisement
Table of Contents
