Edimax PS-1208UWg User Manual page 57

at the same time. When the MFP server starts up, it will auto-detect if the LAN
port is connected to an active network by an Ethernet cable. If the MFP server
is connected to an active network by Ethernet cable when starting up, the MFP
server will run in Ethernet mode. If the MFP server is not connected to an
active network by Ethernet cable when starting up, the MFP server will run in
wireless LAN mode. The MFP server default is in "Auto" mode.
ESSID is the unique name identified by in a wireless LAN. The ID prevents the
unintentional merging of two co-located WLANs. Please make sure that the
ESSID of all stations and access points in the same WLAN network are the
same.
th
Channel Number the channel of MFP server is fixed on channel 11 .
46