Recording Still Images - Canon DCD CAMCORDER Instruction Manual

Recording Still Images

To use the still images functions, you will need to set [STILL IMAGES] to [ON]
beforehand (
To change the operating mode, refer to About the Operating Modes (
1. Open the LCD panel and the lens
cover (move the lens cover switch
down to
Start/Stop
2. Press
Once the focus is automatically adjusted,
will turn green and one or more AF
frames appear.
Start/Stop
3. Press
The DISC access indicator will flash as
the image is being recorded.
Avoid the following actions while the disc access display
the DISC access indicator is on or flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to vibrations or strong impacts.
- Do not open the disc cover and do not remove the disc.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the operating mode.
If the subject is not suitable for autofocus,
pressed halfway and adjust the focus manually with the multi selector (
24
9).
).
halfway.
fully.
9).
appears and while
Start/Stop
turns yellow. Keep
).