Manually Adjusting The Focus - Canon DCD CAMCORDER Instruction Manual

Manually Adjusting the Focus

Autofocus may not work well on the following subjects. In such case, focus manually.
Reflective
surfaces
To change the operating mode, refer to About the Operating Modes (
Mode switch:
1. Adjust the zoom.
FOCUS
2. Press
"MF" appears.
3. Adjust (
appears focused.
FOCUS
Pressing
The camcorder will automatically return to autofocus when you set the mode
switch to
Readjust the focus when you have turned off the camcorder.
Infinity Focus
Use this function when you wish to focus on faraway subjects such as mountains or
fireworks.
1. Adjust the zoom.
FOCUS
2. Keep
• " " appears.
FOCUS
• Pressing
If you operate the zoom or the multi selector (
changes to "MF" and the camcorder returns to manual focusing mode.
42
Subjects with low
contrast or without
vertical lines
( ).
) the focus as required until the image
( ) again will return to autofocus.
.
( ) pressed down for more than 2 seconds.
( ) again will return to autofocus.
Through
Fast Moving
dirty or wet
Subjects
windows
) during infinity focus, "
Night Scenes
9).
"