JRC NTG-420 Operation Manual page 6

Solid state transmitter-receiver
Hide thumbs Also See for NTG-420:
Table of Contents

Advertisement

Do not drop or bump the device.
Physical shock may cause a s
hock or a fire.
Prohibition
Do not remove the back lid, the cabinet or
the cover, or do not modify the device.
Consult with our company for
internal inspection and repair.
Do not decompose
Do not damage the power cord or the plug.
Prohibition
★ In the case of damages, unplug from the outlet and ask our company
Damaging, processing, loading, heating, bending and twisting
forcedly or pulling may deteriorate insulation of coating, expose
cores or break the cord to cause a shock or a fire.
DANGER
Do not use the device under a voltage
other than the indicated power-supply
voltage.
Prohibition
When thunder has started, do not touch
the power cables, the signal cables and
the device.
Do not touch
6
7ZPRR002
Malfunction
may
occur
cause a shock or a fire.
Touching will cause a
shock
to

Advertisement

Table of Contents
loading

Table of Contents