Wps Setup - Pin - Planet Networking & Communication WNL-U552 User Manual

Sometime WPS may fail, and you can click 'PBC' button few more times to try again. When an access
point is connected, you can click 'Disconnect' to disconnect your wireless network card from a
connected access point, or select another WPS-enabled wireless access point, then click 'Connect' to
establish connection to selected access point, if there are more than one WPS-enabled access point
found. You can also click 'Rotate' button, and next access point on the list will be selected to establish
connection.
If you want to delete a found access point from the list, select it and click 'Delete' button.

3.7.2 WPS Setup - PIN

The PIN number of your wireless network card is an eight-digit number located at the upper-right
position of configuration utility. Remember it, and input the number to your wireless access point as the
WPS PIN code (Please refer to the user manual of your wireless access point for instructions about
how to do this).
- 29 -