Wps Setup - Pbc (Push-Button Configuration) - Planet Networking & Communication WNL-U552 User Manual

3.7.1 WPS Setup - PBC (Push-Button Configuration)

1. Push the 'WPS' button on your wireless access point (the button used to activate WPS standby
mode), or use other way to start WPS standby mode as the instruction given by your wireless access
point's user manual.
2. Before you start to establish the wireless connection by using WPS, you can click 'Rescan' button to
search for WPS-enabled access points near you, to make sure the WPS function of your access
point is activated.
- 27 -