Wps Configuration - Planet Networking & Communication WNL-U552 User Manual

3.7 WPS Configuration

Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes wireless network
setup become very simple. If you have WPS-enabled wireless access point, and you want to establish
a secure connection to it, you don't have to configure the wireless access point and setup data
encryption. All you have to do is go to the WPS setup page of this wireless card, click a button, and then
press a specific button on the wireless access point you wish to establish a secure connection - just
three simple steps!
For older wireless access points, it's possible to perform a firmware upgrade to become a
WPS-enabled access point. Since they may not have a hardware button to press for WPS setup, you
can use an alternative WPS setup method – input the pin code. Every WPS-compatible wireless
network card comes with a unique WPS pin code; you can just input the code to wireless access point,
and the wireless access point and wireless network card will do the rest for you.
This wireless network card is compatible with WPS. To use this function, the wireless access point you
wish to connect to must support WPS function too. Now, please follow the following instructions to
establish secure connection between WPS-enabled wireless access point and your wireless network
card.
Click 'WPS Configuration' tab, and the following settings will appear:
- 26 -