Advertisement
Quick Links
Quality Bathroom Products
Fixing Instructions
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them during installation to
ensure that your product is fitted safely and that it retains its high quality finish.
Please retain this leaflet for future reference.
Before drilling, ensure there are no hidden cables or pipes in the wall
These products are suitable for installation in zones:
Please see Figure 1 on the back page for details
Cyclone Inline Fan, White - Non Illuminated Art no.33300
Cyclone Inline Fan, White - Cool White LED Art no.32600
Cyclone Inline Fan, White - Warm White LED Art no.33800
Cyclone Inline Fan, Chrome - Non Illuminated Art no.33400
Cyclone Inline Fan, Chrome - Cool White LED Art no.32700
Cyclone Inline Fan, Chrome - Warm White LED Art no.33700
2
Ver No. 3.0 Sept 2014
Advertisement
Related Manuals for HiB Cyclone 33300
Summary of Contents for HiB Cyclone 33300
- Page 1 Cyclone Inline Fan, Chrome - Warm White LED Art no.33700 Fixing Instructions Thank you for purchasing this HiB product. Please read through these instructions carefully and refer back to them during installation to ensure that your product is fitted safely and that it retains its high quality finish.
- Page 2 Quality Bathroom Products Quality Bathroom Products In The Box Includes: 1. Fascia 2. LED Driver (32600, 33800, 32700 & 33700 only) 3. High powered Inline fan, 4. 3 metre flexible ducting 5. Brown external fixed grille 6. Four galvanized steel hose clamps 7.
- Page 3 Mounting 1. Ceiling mounted ventilation should be ducted through the roof space, by ducting to an external soffit under the eaves or grille in the slope of your roof. NB: Ducting installed between a floor and ceiling can only run between joists, not across them.
-
Page 4: Electrical Connection
Quality Bathroom Products Quality Bathroom Products 7. Using a screw driver, 8. Remove bracing clips & remove central unit. remove screws on clips. 9. Place frame in desired 10. Fix frame to desired surface, using suitable location and mark wall plugs if necessary. Then replace central fixing holes. - Page 5 13. Using a screw driver, 14. Using a screw driver, 15. Feed cable through remove cover. remove cable grip. hole & replace grip. 16. Wire the fan as per the diagram below. Do Not Use QF - Circult Breaker ST - External Switch (e.g. light switch) 17.
-
Page 6: Operation
Quality Bathroom Products Quality Bathroom Products Operation The fan is rated for connection to single-phase AC220-240 V / 50/60 Hz power mains. The fan is designed for continuous operation always connected to mains power. Air motion direction in the system must match the pointer on the fan casing. - Page 7 Timer System The fan is operational after the control voltage is supplied by the external switch (e.g., by the light switch) to the input terminal LT. After the fan is switched off the fan continues to operate within the timer period set by the timer from 2 to 30 minutes.
- Page 8 HiB Ltd. Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN ©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they...