Safety Warnings - Schenker MODULAR 30 Electron Operation And Maintenance Manual

5. SAFETY WARNINGS.

Ensure the watermaker is correctly installed by contacting a Schenker service point.
The water produced by a Schenker Modular 60 watermaker using clean sea water will have
an average quality of 300ppm TDS. Unless the correct cleaning procedures are carried out in
accordance with this manual, there may be bacteria present in the produced water.
Avoid using the watermaker where seawater is polluted (ports, or close to built-up areas, etc.)
Do not locate near the pumps unit in areas that can reach elevated temperature. Ie: Engine
compartments or where inflammable substances are stored. This will adversely affect the
working of the pumps and may present a fire risk.
Do not touch the pumps and pump fans when the unit is working.
Children and those unfamiliar with the watermaker shall not touch or operate the unit.
Check periodically for leaks.
Do not operate the watermaker when the vessel is left unattended.
Avoid installing the watermaker where a leak may go unnoticed and jeopardize the safety of
the boat.
Unqualified and non-Schenker personnel shall not perform any maintenance work on the
watermaker
22