Advertisement
MOUNTING INSTRUCTIONS
1. Place the unit against the
selected mounting surface.
2. Mark the areas where the
mounting holes will be drilled. If
the mounting surface is part of
the vehicle, make sure no vital
components could be damaged
by the drilling process.
Important! Hardware is sold seperately.
3. Drill 2-3 mounting holes per
bracket in the marked surface.
Use hardware (not provided)
to secure the brackets to the
mounting surface.
6
FE NI E X // INST R U CT I ON MA N UA L
WE B // w w w.fen iex .co m
6.4"
4.375"
Mark holes
Note! The above Diagram is not to scale.
TM
1.4"
Advertisement
