Advertisement
Triton Mounting Instructions
See the illustrations below for mounting
information.
Step 1: Clean the selected mounting
surface area.
Step 2: Using a 10 mm wrench, remove
the three bolts connecting the speaker to
the provided L-Shaped bracket. This will
detach the speaker from the bracket (see
figure 3.0 & 3.1).
Step 3: Place the L-Shaped bracket against
the selected mounting surface and mark
the spot for at least two mounting holes
(see figure 3.2).
Step 4: Drill a minimum of two, 0.25" holes
in the mounting surface, making sure not
to damage any vital components of the
mounting surface.
L-Shaped Bracket:
Top View
7
F E NIE X .
2016
IN STR U CT I ON MA NUA L
WE B. w w w.feniex .co m
Figure 3.2
Figure 3.3
Screws
L-Shaped
Bracket
L-Shaped Bracket: Front View
Step 5: Utilizing bolts larger than 0.25",
secure the L-bracket to the surface mount.
Step 6: To install the speaker to the
bracket, pass the speaker wires through an
existing hole on the bottom of the bracket
(see figure 3.2).
Step 7: To reattach the speaker to the
bracket, place the three provided bolts
through the back of the L-bracket and
fasten the bolts.
TM
V2.0
Figure 3.0
Speaker
Figure 3.1
Advertisement
