Eton FRX5-BT Owner's Manual page 7

SET S.A.M.E. ALERT MODE
Set S.A.M.E location using preloaded
locations
1. Press MENU.
2. Rotate TUNING dial up three steps.
3. COUNTY – MUL, COUNTY –SIN or COUNTY –ALL
will be displayed.
4. Press WB.
5. The word MULTIPLE, SINGLE or ALL will flash on
the display.
6. Rotate the TUNING dial up or down to the
desired choice.
7. Press WB to enter
MULTIPLE or SINGLE OPERATION:
8. The memory slot number, 01 – 25 will display on
the left side of the display.
9. Rotate the tuning dial up or down to select the
desired channel to set .
10. Press WB to enter.
11. Use TUNING dial to select USA or CANADA or
USER SET for your location.
12. Press WB to enter.
USA OR CANADA OPERATION:
13. Use TUNING dial to select STATE if in USA,
Province if in CANADA.
14. Press WB to enter.
15. Use TUNING dial to select COUNTY if in USA or
AREA if in CANADA.
16. Press WB to enter, entered location will scroll
across the screen for this location. Rotate
TUNING dial to select a new location or press
MENU to EXIT.
17. If no buttons are pressed for 20 seconds, the unit
will go back to normal position.
FRX5-BT OWNER'S MANUAL
7