Operation - Dexter Laundry 1500RH2-50.5 Legal And Safety Instructions

RU

6. OPERATION

KZ
These rotary hammers have four settings: drilling, hammer drilling, chisel rotation and chiselling. Always allow the motor
to come to a complete stop before changing the operating mode to avoid damage to the tool.If you want to change the
EN
Drilling
Set the function knob (6) to drinlling mode.
Hammer drilling
Set the function knob (6) to hammer drinlling mode.
Chisel rotation Chisel rotation
Set the function knob (6) to chisel rotation mode.
Chiseling
Set the function knob (6) to chiselling mode.
Do not drill in blind areas where there could be hidden electric, gas or water lines. Use the appropriate detectors
to find these lines in the work area or call the local utility company for assistance.
Touching electric lines may cause a fire or an electric shock. Striking a gas line will probably result in an explosion. Breaking
into a water pipe will cause property damage or may cause an electric shock.
Hold electric tools by their insulated handles whenever there is the possibility of touching hidden
wires or the tools own cords while using them. Touching a "live" wire can transfer the voltage to
the exposed metal parts of the tool and give the operator an electric shock. Always use the correct
voltage: the voltage of the power source must comply with the values on the nameplate of the machine.
adjust the function knob (6).
35