Advertisement
INTRODUCTION
1. Dual RJ45 network interfaces: Network monitoring interface(Built in switch chip).
2. Cooling vents. Forced airflow from front to back through the air filter.
3. Integrated LCD control screen with backlight.
4. Control knob. Turn to select the DSP menu and press to confirm.
5. Mains Power switch. Used to turn the power on and off. When I is pressed, the power is turned on.
6. Mains Power input. Neutrik powerCon 20 A.
7. Fan. Provides forced ventilation for front to back cooling.
8. Output connectors for connection to passive loudspeakers.
In stereo or single-channel mode, connect the speakers to the socket using the following methods:
In bridge mode, use the following method to connect the speaker to the socket:
9. XLR Balanced signal input connectors.
Advertisement
