Zephyr Presrv PRB24C01ABSG Use, Care And Installation Manual page 11

REMOVING THE GLASS SHELVES:
1. Open the door completely.
2. Push in glass shelf lock pin (1).
3. With lock pin pushed in, pull out the shelf (2)
REMOVING THE WOODEN SLIDE SHELF:
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull the shelf
4. The shelf has
the post on the right side
by hand or by using a
5. Evenly pull out the shelf from the track
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out
of their track.
Note: The cooler may experience decreased cooling e ciency if air
loaded cabinet.
yourself it is fully extended
posts on both sides as indicated in the diagram belo
ead scre driver.
pulling up on the le plas c post. You may choose to do this
it is completely removed from the inner compartment.
6
While facing the unit, press
is restricted due to a fully