Table of Contents
Advertisement
HOW TO UPDATE YOUR CAMERAS FIRMWARE
1.Download the .bin Firmware file from our support page. FWT03.bin. Please note that .bin
file name is the same for the CF-1 and CR-1 cameras, but the content is unique for each so be
sure to download from the correct link for your camera
2. Insert the micro SD into your computer and open it to the first page (called the root level)
3. Copy the FWT03.bin into the root level of your Micro SD card – beside the BIKEDV. (The
file name should match the FWT03.bin name exactly). Example below
4. Safely eject your SD card from your computer.
5. Place the SD card into you CF/CR-1Camera and power on. Please wait for it to
automatically update itself. The CR-1 the top red Led will flash and the CF-1 the white LED
will flash erratically for a short while, then settle into normal switch on operation/sequence
once the update is complete.
6. Now navigate to the settings menu in the App and check the firmware version to ensure the
firmware has been successfully updated to T03-20210805V1.0 the current firmware version
7. Finally once updated successfully delete the .bin file from the sd card otherwise the camera
will update every time you power it on
Advertisement
Table of Contents
Need help?
Do you have a question about the CR-1 and is the answer not in the manual?