Advertisement
Congratulations on your purchase of the Connective Peripherals USB2-F-7001
or USB2-F-7101 USB to CANbus adapter. Getting started is quick and easy:
General Installation
Detailed device driver installation instructions, port information and
mechanical details are in the USB2-F-7x01 datasheet. This can be
downloaded from: http://www.connectiveperipherals.com.
To begin, connect the USB cable to your PC USB Host or a USB Hub
connector and the USB2-F-7x01. Power is supplied by the USB bus,
so no external power supply is required.
Device drivers are needed for the PC to communicate with the USB2-
F-7x01,
http://www.connectiveperipherals.com. To install the drivers , follow
the following steps:
1. Download and unzip the drivers to a folder.
2. Connect the USB cable to your PC USB Host or a USB Hub
connector and the USB2-F-7x01. Power is supplied by the USB
bus, so no external power supply is required.
3. The Windows "Found New Hardware Wizard" will appear. Select
the choices to install the drivers from a specific location, then
browse to the folder just created when the drivers were
downloaded from the EasySync website.
4. If a notice appears indicating that the drivers are not signed,
select "Install Anyway".
5. The Driver wizard will appear a second time. Repeat the steps 2
to 4 above to complete the installation.
© Connective Peripherals Pte Ltd
Clearance Number : CP#033
Document Reference Number: CP_000043
USB2-F-7x01_Quick_Start_Guide Version 1.3
USB2-F-7x01 – Quick Start Guide
and
can
be
downloaded
from:
Advertisement
Table of Contents
Related Manuals for Connective Peripherals USB2-F-7 01 Series
Summary of Contents for Connective Peripherals USB2-F-7 01 Series
- Page 1 USB2-F-7x01 – Quick Start Guide Congratulations on your purchase of the Connective Peripherals USB2-F-7001 or USB2-F-7101 USB to CANbus adapter. Getting started is quick and easy: General Installation Detailed device driver installation instructions, port information and mechanical details are in the USB2-F-7x01 datasheet. This can be downloaded from: http://www.connectiveperipherals.com.
- Page 2 The USB2-F-7x01 comes with Connective Peripherals CANbus firmware pre-loaded from the factory. From time-to-time, Connective Peripherals will update the firmware and make it available on the web. Updated firmware can be obtained from: http://www.connectiveperipherals.com. Included with the firmware download will be a copy of EASYBoot, a utility that programs the firmware into the USB2-F-7x01.
- Page 3 2010-02-22 Included USB2-F-7101 Version 1.3 2019-03-25 Re-branding to reflect the migration of the product from EasySync to Connective Peripherals name (changed logo, copyright, internal hyperlinks) © Connective Peripherals Pte Ltd Clearance Number : CP#033 Document Reference Number: CP_000043 USB2-F-7x01_Quick_Start_Guide Version 1.3...
Need help?
Do you have a question about the USB2-F-7 01 Series and is the answer not in the manual?
Questions and answers