Settings; Basic Setting Operation; General Settings (General); Sound Settings (Sound) - Sony XAV-AX5160 Operating Instructions Manual

Settings

Basic Setting Operation

You can set items in the following setup categories:
General Settings (General), Sound Settings (Sound),
Visual Settings (Visual), BLUETOOTH Settings
(Bluetooth)
1
Press HOME, then touch [Settings].
2
Touch one of the setup category.
The items that can be set differ depending on
the source and settings.
3
Move the scrollbar up and down to select
the desired item.
To return to the previous display
Touch .
To switch to the playback screen
Touch .

General Settings (General)

Language
Selects the display language: [English],
[Español], [Français], [Deutsch], [Italiano],
[Português], [Русский], [
[ ], [ ], [Indonesia].
Date/Time
Set Date/Time
Sets the date and clock time: [Auto(RDS)],
[Manual].
Date Format
Selects the format: [DD-MM-YYYY], [MM-DD-
YYYY], [YYYY-MM-DD].
Time Format
Selects the format: [12-hour], [24-hour].
Beep
Activates the operation sound: [OFF], [ON].
Rear Camera
Selects the image from the rear camera: [OFF],
[ON].
Rear Camera Guide Line
Displays the rear camera guide lines: [OFF], [ON].
(Available only when [Rear Camera] is set to
[ON].)
Driving Position
Selects the driving position to optimize usability
of Apple CarPlay, Android Auto, and microphone
receiver: [Left Side], [Right Side]
14
GB
], [ ], [ ],
MIC Adjust
Sets the microphone parameters according to
the size of the car: [Small Cabin], [Medium
Cabin], [Large Cabin].
Tuning Steps
Sets the FM/AM tuning step of your country:
[50kHz/9kHz], [100kHz/10kHz], [200kHz/10kHz].
(Available only while the source is off and the
clock is displayed.)
Factory Reset
Initializes all the settings to the factory settings.
Firmware Version
Updates and confirms the firmware version.
Open Source Licenses
Displays the software licenses.

Sound Settings (Sound)

EXTRA BASS
Reinforces bass sound in synchronization with
the volume level: [OFF], [1], [2].
EQ10/Subwoofer
Selects an equalizer curve and adjusts the
subwoofer level.
EQ10
Selects the equalizer curve: [Xpander], [R&B],
[Rock], [Pop], [Dance], [Hip-Hop], [EDM], [Jazz],
[Salsa], [Custom], [OFF].
[Custom] adjusts the equalizer curve: –6 to +6.
Subwoofer
Adjusts the volume level of the subwoofer:
[OFF], –10 to +10.
Balance/Fader
Adjusts the balance/fader level.
Balance
Adjusts the sound balance between the left and
right speakers: [L15] to [R15].
Fader
Adjusts the sound balance between the front
and rear speakers: [Front 15] to [Rear 15].
Crossover
Adjusts the cut-off frequency and subwoofer
phase.
High Pass Filter
Selects the cut-off frequency of the front/rear
speakers: [OFF], [50Hz], [60Hz], [80Hz], [100Hz],
[120Hz].
Low Pass Filter
Selects the cut-off frequency of the subwoofer:
[OFF], [50Hz], [60Hz], [80Hz], [100Hz], [120Hz].
Subwoofer Phase
Selects the subwoofer phase: [Normal],
[Reverse].