Table of Contents
Advertisement
3.2 Assembly/Panel Removal
3.2.1 Rear Cover and stand removal
Warning: Disconnect the mains power cord before removing the rear cover.
1. Remove fixation screws [1] that secure the base assy..
2. The cover is secured by clips, be very careful with releasing those.
3. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
1
3.2.2 Keyboard Control Unit
1.
Release the connector from the SSB Board.
Caution: be careful, the Keyboard is catch on the Back cover, please be careful to avoid damage the fragile connectors!
2.
Remove all the fixation screws[2] and the cable from the keyboard control panel [1] and take it out from the panel plate
When defective, replace the whole unit.
2
1
2
1
1
Advertisement
Table of Contents
