Marktrace MR6100 Series User Manual page 37

9 Common faults and exclusion methods
Failure Description
Unable to start reader
Unable to connect
reader
Reader is unable to
identify tag
No sound when
reading tag
Tag with password
operation failed
Invalid tag
settings
Unable to refresh the
page in the
configuration
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
E-mail：technical@marktrace.com
◢MR6100 Serial UHF reader user manual（Ver 1.0）◣
Simple exclusion methods
■make sure the power adapter indicator light is on
■make sure the reader power interface is connected well
■make sure the reader IP address is correct
■make sure the network environment is good
■make sure antenna ports are connected correctly
■make sure antenna power is not to be 0
■make sure the buzzer is open
■make sure that when tag operates with password,the
radiation range of antenna is single tag or small amount
of tags
filter
■make sure the reading mode for reader is multi-tag read
■Clear CGI in the web address or re-enter the IP address
web
of the reader and refresh
R.C.
Phone：0755-2654 6392
Address：
Post：518057
FAX：0755-2655 3743
Website：www.marktrace.com
37