Summary of Contents for Campania International FT-224
Page 1
FT-224 Borghese in Basin Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 15-25 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kit •...
Page 2
FT-224 Borghese in Basin Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-224 Borghese in Basin Fountain Assembly Instructions Step 8 - Position the top bowl (FT-224B) over the pedestal (FT-224C). Step 9 - Insert the CPVC end of the tubing assembly into the coupling protruding from the bottom, of the top bowl (FT-224B).
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.