Edimax WP-S1301 UM User Manual
  1. Manuals
  2. Brands
  3. Edimax Manuals
  4. Gateway
  5. WP-S1301 UM
  6. User manual
Edimax WP-S1301 UM User Manual

Edimax WP-S1301 UM User Manual

Wireless presentation gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WP-S1301 UM
Wireless presentation gateway
User Manual
Version 0.1 Draft

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WP-S1301 UM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Edimax WP-S1301 UM

Summary of Contents for Edimax WP-S1301 UM

  • Page 1 WP-S1301 UM Wireless presentation gateway User Manual Version 0.1 Draft...
  • Page 2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 3 IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. "Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device."...

  • Page 4: Table Of Contents

    Table of Contents Chapter I Product Introduction .................. 5 1-1 Package Contents ..................5 1-2 Requirements ....................6 1-3 Highlights ....................... 7 1-4 Part Names....................8 1-5 Initial Setup ....................11 Chapter II Using WPG ....................14 2-1 Check the IP address of WPG ..............14 2-2 Connect to WPG by wireless network .............
  • Page 5 5-5-2 ‘Advanced’ Settings ................41 5-5-3 ‘Security’ Settings ................42 5-5-4 ‘WPS’ Settings ..................47 5-6 Projection Setting ..................49 5-7 Password Setting ..................50 5-8 Configuration Tools ..................51 5-8-1 Configuration Tools ................51 5-8-2 Firmware Upgrade ................52 5-9 Restart ......................
  • Page 6 Important Safety Instructions 1. Do not place the product near water or in humid and / or hot environment, like bathroom or kitchen. Please refer to the specification of the environment. 2. This product is designed to be used indoor. 3.

  • Page 7: Chapter I Product Introduction

    Chapter I Product Introduction Congratulations on your purchase of ViewSonic Wireless Presentation Gateway WPG-350. This section introduces you to the WPG-350 (referred to as the WPG in this user guide). 1-1 Package Contents (1) WPG-350 (2) AC adapter (3) Remote controller (4) IR receiver extension cord (5) AC adapter extension cord (6) VGA cord...

  • Page 8: Requirements

    1-2 Requirements Intel Pentium 4/1.5 GHz or higher PC CPU (Recommend Intel Core 2 Duo CPU For Video Playback Speed Mode) 512 MB of RAM or higher Memory (Recommend 1GB of RAM For Video Playback Mode) Windows XP 32 bit or above Operating (Recommend Windows XP 32 bit) System...

  • Page 9: Highlights

    1-3 Highlights Thanks again for choosing the product. This product allows multiple users to connect to the same projector by wired or wireless network and avoiding the hassle of using VGA cable. Features 802.11 b/g/n Wireless compatibility. Supports both Wireless and Ethernet connectivity VGA connections Conference control Supports multiple users at the same time with Quarter split screen...

  • Page 10: Part Names

    1-4 Part Names Front View Item No. Description WPS: Single Click when the device is ON. Turn On: Single Click when the device is OFF. „POWER‟ LED „LAN‟ LED 2 - 5 „WIRELESS‟ LED „PC IN‟ LED Back View Name Description Connect to A/C adapter / ViewSonic projector’s D/C...
  • Page 11 USB 2 USB TYPE A With Mouse Control Function(will add PC less function in the future) Side View Name Description PC IN Connect to computer‟s VGA output port Note: 1) WPS stands for Wi-Fi Protected Setup. Item No. Description 1 Power Stand-by mode on/off Show user list: Single Click.
  • Page 12 downward by your thumb to open Remote Controller battery compartment 9 IR LED Infrared signal transmitter 5 7 6 Note: 1) Remote controller effective distance is 7 meters. This distance will be shortened in some environments, or when the battery is low. 2) If there’s strong light source near WPG and / or remote controller, remote controller may not be able to function properly.

  • Page 13: Initial Setup

    1-5 Initial Setup Step-by-step setup instructions Connect one end of the VGA cable to the external display, and the other to WPG VGA-out port locates at back. Connect the Ethernet cable to the LAN port Connect audio cable to WPG Audio-out Port locate at the back, and the other end to an external amplifier / speaker.
  • Page 14 Adjust the antennas so they are perpendicular to the ground. Connect the A/C power adapter to the electrical outlet on the wall. Connect A/C power adapter to the power jack labeled as „12V‟ at the back of WPG. To fix the product placement, please use two wall mount holes located at the back of the product.
  • Page 15 Note: DO NOT USE VELCRO STICKER ALONE TO FIX THE PRODUCT ON THE WALL! 2) If there’s strong light source near and / or remote controller, remote controller may not be able to function properly.

  • Page 16: Chapter Ii Using Wpg

    Chapter II Using WPG 2-1 Check the IP address of WPG When WPG is powered on, check the connected display, you can find the IP address and login code Instruction Page: The IP Address (Wireless / Wired Ethernet) of the device. You can connect to WPG by the IP address of the connection type you‟re using (wired / wireless).

  • Page 17: Connect To Wpg By Wireless Network

    2-2 Connect to WPG by wireless network Use your computer‟s Wireless Network Connection window to access an available wireless network. Select the device from the list. Click Connect. The default device name is WPG-350. Note: If using a wireless client other than Windows, the screen above may look differently.

  • Page 18: Manual Network Connection Setting

    2-3 Manual Network Connection Setting If there‟s no DHCP server available on your LAN, please follow the following instructions to set the IP address of the computer. If the operating system of your computer is…. Windows XP - please go to section 2-3-1 Windows Vista - please go to section 2-3-2 Macintosh...

  • Page 19: Windows Xp Ip Address Setup

    2-3-1 Windows XP IP address setup: Click „Start‟ from windows toolbar locate at bottom, open control panel, then select Network and Internet Connections, click Network Connections, and then double-click Local Area Connection, Local Area Connection Status window will appear, and then click „Properties‟...
  • Page 20 Click „Start‟ from windows toolbar locate at bottom to select control panel. Click View Network Status and Tasks, then click Manage Network Connections. Right-click Local Area Netwrok, then select ‘Properties’. Local Area Connection Properties window will appear, select „Internet Protocol Version 4 (TCP / Ipv4), and then click „Properties‟...

  • Page 21: Macintosh Ip Address Setup

    2-3-3 Macintosh IP address setup: Select „System Preferences‟, and double-click „Network‟. Select „Manually‟ in „Configure‟ field, then input the following settings in respective field: IP address: 192.168.0.x (where x is an integer greater or less than 200, if there‟s more than one computer need to use this WPG on the same network, every computer should use an...

  • Page 22: Chapter Iii Using Application Software (Pc Version)

    Chapter III Using Application Software (PC Version) 3-1 Download and Install Application Software Before any computer can use the WPG, application software must be installed first. Please follow instructions to download and install WPG application software: Use the web browser to connect to the IP address shown on WPG (Wireless / Wired IP address) WPG‟s IP address is shown at the...
  • Page 23 Please be patient when your computer is downloading application software: After application software download is complete, click „Run‟. Click „Next‟ to continue. A new icon will appear.
  • Page 24 Double click the icon to launch login window, „Server IP‟ will be determined automatically, please input a user name (login window uses your computer‟s name by default), and input login code as displayed on upper-right of WPG-350‟s display. If login code is correct, application software will appear.

  • Page 25: Launch Application Software And Login

    3-2 Launch Application Software and Login Double-click on application software to launch WPG‟s application software. Application software will search for WPG connected to local area network when it starts, WPG‟s device name will be displayed at „Server IP‟ field: Please input a unique user name (used to identify each WPG user and should not be the same as other users) in „User Name‟...

  • Page 26: Use Icon On Application Software

    3-2-1 Use icon on application software Name Function Description Menu Access menu list. Play / Pause Start / pause presentation. When pausing a progressing presentation, the displaying image will freeze; press play button again to resume Minimize Minimizes Application Software window Close Closes Application Software window Stop...

  • Page 27: Menu List

    3-2-2 Menu List Besides the buttons, you can also click „Menu‟ button to access menu list. Item Name Function Description Go to „ADMIN‟ page of web menu Administrator Open a video file for video playback (in video playback Open File mode) System / IP Address: check the system status and the IP Status...

  • Page 28: Video Playback (Pc Version)

    3-3 Video playback (PC Version) When you click „Video‟ button in application software, the user interface will change and look as follow: Description Playback / Pause Volume up Fast forward (for 10 seconds) Stop video play Volume down Rewind (for 10 seconds) Open video file To start video playback: 1.

  • Page 29: Quarter Split Screen

    3-4 Quarter Split Screen When there is more than one presenter, you can use this function to display up to 4 presenter‟s content to present on display screen simultaneously. To use Quarter Split Function, please login to WPG, and select a key (1 to 4) to present: Number 1 to 4 correspond to different area of display screen:...

  • Page 30: Chapter Iv Using Application Software (Mac Version)

    Chapter IV Using Application Software (MAC Version) 4-1 Download and Install Application Software Before any computer can use the WPG, application software must be installed first. Please follow instructions to download and install WPG application software: Use safari or IE web browser to connect to the IP address shown on WPG (Wireless / Wired IP address) WPG‟s IP address is shown at the...

  • Page 31: Launch Application Software And Login (Mac Version)

    4-2 Launch Application Software and Login (MAC Version) Double-click on application software to launch WPG‟s application software. Application software will search for WPG connected to local area network when it starts, WPG‟s device name will be displayed at „Server IP‟ field: Please input a unique user name (used to identify each WPG user and should not be the same as other users) in „User Name‟...

  • Page 32: Use Icon On Application Software

    4-2-1 Use icon on application software Name Function Description Start / pause presentation. When pausing a Play / Pause progressing presentation, the displaying image will freeze; press play button again to resume Stop a progressing presentation Stop Displays login code (4-digit number) Login code / and wireless signal strength Signal...

  • Page 33: Menu List

    4-2-2 Menu List Besides the buttons, you can also click „Menu‟ button to access menu list. Item Name Function Description Administrator Go to „ADMIN‟ page of web menu Open File Open a video file for video playback (in video playback mode) System / IP Address: check the system status and the IP Status...

  • Page 34: Video Playback

    4-3 Video playback When you click „Video‟ button in application software, the user interface will change and look as follow: Description Playback / Pause Volume up Volume down Stop video play Fast forward (for 10 seconds) Rewind (for 10 seconds) Open video file To start video playback: 1.

  • Page 35: Quarter Split Screen (Mac Version)

    4-4 Quarter Split Screen (MAC Version) When there is more than one presenter, you can use this function to display up to 4 presenter‟s content to present on display screen simultaneously. To use Quarter Split Function, please login to WPG, and select a key (1 to 4) to present: Number 1 to 4 correspond to different area of display screen:...

  • Page 36: Chapter V Configure Wpg

    Chapter V Configure WPG 5-1 Conference Control When there is more than one presentation login to WPG, you can control the content from different presenter via Conference Control webpage. Use the web browser to connect to the IP address of WPG (Wireless / Wired IP address).
  • Page 37 To select user by remote controller: When there is more than one connected application software, you can also use remote controller to select one of them to display the content (same as „Conference control‟ function described in last chapter). Press „Login‟ button on remote control.

  • Page 38: Connect To Web Configuration Menu

    5-2 Connect to Web Configuration Menu Use the web browser to connect to the IP address of WPG (Wireless / Wired IP address). WPG‟s IP address can be found at the lower-left corner of Instruction page (refer to chapter 2-1). Click „Administrator Login‟...

  • Page 39: Status & Info

    5-3 Status & Info Displays system information, like system software version and IP address. Many useful information can be obtained here when you need help about system configuration and firmware upgrade. 5-4 Network Settings...
  • Page 40 Displays and configures the network settings. Item Description Obtain an IP address WPG will obtain an IP address from DHCP server automatically automatically. Use the following IP Set WPG IP address manually. Fill the fields below to address setup IP address. DNS Server Please input the IP address of the DNS (Domain Name Service) server.

  • Page 41: Wireless Settings

    5-5 Wireless Settings Configures wireless network settings. 5-5-1 ‘Basic’ Settings Displays and configures the wireless settings. Item Description Wireless Function Select „Enable‟ to enable wireless network function;...
  • Page 42 „Disable‟ to disable it. Mode Select wireless mode. Only AP (Access Point) mode is supported. Band Select the wireless band. Available options are: 2.4GHz (B) - 802.11b clients only. 2.4GHz (N) - 802.11 Draft-n clients only. 2.4GHz (B+G) - 802.11b and 802.11n clients. 2.4GHz (G) - 802.11g clients only.

  • Page 43: Advanced' Settings

    5-5-2 ‘Advanced’ Settings Display and configures the advanced settings. Item Description Fragment Set the Fragment threshold of wireless radio. Threshold Default value is 2346. RTS Threshold Set the RTS threshold of wireless radio. Default value is 2347. Beacon Interval Set the beacon interval of wireless radio. Default value is 100.

  • Page 44: Security' Settings

    Preamble Type Set the type of preamble of wireless radio, Default setting is ‘Short Preamble’. Broadcast Device Decide if the product will broadcast its own device Name (SSID) name or not. You can hide the device name of this product (set the option to „Disable‟) CTS Protect Enable to reduce the chance of radio signal collisions between 802.11b and 802.11g wireless access points.
  • Page 45 Display and configures the encryption settings. Item Description Enable 802.1x Check this box to enable 802.1x authentication. Authentication RADIUS Server IP IP address of RADIUS authentication server here. address RADIUS Server Port number of radius server here. Port RADIUS Server Password of radius server.
  • Page 46 Display and configures the encryption settings. Item Description Key Length Select WEP key length (64 bit or 128 bit), longer WEP key provides better security. Recommend to select „128-bit‟ for better security. Key Format Select key format: ASCII or Hex. ASCII: 5 characters (64 bit key length) / 13 characters (128 bit key length) HEX: 10 characters (64 bit key length) / 26 characters...
  • Page 47 address RADIUS Server Port number of radius server, from 1 to 65535. Default Port setting is 1812. RADIUS Server Password of radius server, up to 64 characters. Password Click „Apply‟ button to save the settings. NOTE: When the configuration settings are changed, you must restart the network connection.
  • Page 48 Click „Apply‟ button to save the settings. NOTE: When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking “Restart” on the main menu. 5-5-3-4 Encryption: WPA RADIUS Enable WPA encryption with RADIUS authentication support. The client must support WPA encryption and you need to provide the setting of RADIUS server here.

  • Page 49: Wps' Settings

    5-5-4 ‘WPS’ Settings In this menu, you can use WPS (Wi-Fi Protected Setup) to setup secure wireless connections quickly and easily with WPS-compatible wireless clients. Display and configures the WPS setting. Item Description Enable WPS Check this box to enable WPS functionality; uncheck to disable WPS.
  • Page 50 „Enrollee‟. Default and recommend setting: Registrar. Configure via Push Click “Start PBC” to handshake with other device with Button WPS function. NOTE 1: When WPG is in „Registrar mode‟, another wireless device must set to „Enrollee‟ mode; and vice versa. NOTE 2: When no WPS connection is established within 2 minutes, this mode will be turned off.

  • Page 51: Projection Setting

    5-6 Projection Setting Displays and configures the projection setting. Item Description Instruction Page Select the displaying language. Language Selection Output Resolution Select output resolution for projection. Presentation lock Check this box to prevent other users to interrupt current presentation. Click „Apply‟ button to save the settings. NOTE: When the configuration settings are changed, you must restart the network connection.

  • Page 52: Password Setting

    5-7 Password Setting Displays and configures the password setting. Item Description Current Password Input current password here. New Password / New Password: Enter new password. Confirmed Confirmed Password: Confirmed the new entered Password password. Click „Apply‟ button to save the settings. NOTE: When the configuration settings are changed, you must restart the network connection.

  • Page 53: Configuration Tools

    5-8 Configuration Tools 5-8-1 Configuration Tools Allows you to backup / restore the setting of WPG. Displays and configures the configuration tools. Item Description Backup Settings Click „Save…‟ button to save wireless presentation gateway‟s current setting as a file and store it on your computer.

  • Page 54: Firmware Upgrade

    5-8-2 Firmware Upgrade Upgrade the firmware of this WPG. If WPG connects to Internet and you wish it to upgrade firmware automatically, select „Auto‟; WPG will download latest firmware and upgrade automatically. When you set this setting to „Manual‟, WPG will detect new firmware on Internet automatically, and you‟ll see a prompt message on OSD menu.

  • Page 55: Restart

    5-9 Restart Restart WPG when the device is not working properly or to apply changes made on web configuration menu. Note: Restart takes about 60 seconds.
  • Page 56 Click „Apply‟ to restart the WPG. (PC) (MAC) Click „OK‟ to restart the WPG, or click „Cancel‟ to abort.

  • Page 57: Logout

    5-10 Logout If you wish to logout from web configuration menu, click „Logout‟.

  • Page 58: Chapter Vi Appendix

    Chapter VI Appendix 6-1 Hardware Specification Product name WPG-350 Power Supply External power supply (12V DC, 1A) Dimensions 133.4 x 92.4 x 31.08mm Weight 200g Connectivity VGA Connector : VGA OUT ------ D-sub 15 pin mini x 1(Black) x 1 PC IN ------------D-sub 15 pin mini x1(Blue) x 1 Audio Output Interface: 3.5mm jack x 1...
  • Page 59 Support Support Format (For Windows) Format Format Category Video Audio* MPEG4 H.261 H.263 Microsoft MPEG-4 v1/v2 PCM, ADPCM MPEG1 MPEG MPEG1 MPEG1 MPEG4 WMV7** WMVA1**, WMVA2** WMV8** * Audio: Does not support AAC and MP3 ** Supported by Windows Media Player 10 or above Support Format (For MAC) Format Category...

  • Page 60: Troubleshooting

    6-2 Troubleshooting Scenario: Can‟t connect to wireless presentation gateway Solution: 1. Check the LED lights located at the front of WPG. If „Power‟ LED does not light, do the following check: Check the connection of A/C adapter, and if the electrical outlet you used ...
  • Page 61 6. Make sure the IR extending cable is correctly inserted to „IR IN‟ jack at the back of WPG, not „AUDIO OUT‟ jack. Scenario: No image displayed on WPG‟s display Solution: 1. Check the connection between video display and WPG. 2.

This manual is also suitable for:

9513001020

Table of Contents