capsula JR4 Manual page 5

English
Index / page
1. Using the 4 as a child car seat
capsula® JR
2. Installation in the car
3. Care instructions
4. Important notices
5. Some fi nal hints
Operating Instructions
A Cover
B Seat base
C Fixation lugs for three-point-
vehicle belt
D Belt block anchor
N Diagonal belt of the three-point-vehicle belt
O Lap belt of the three-point-vehicle belt
P Belt latch of the three-point-vehicle belt
Q Belt buckle of the three-point-vehicle belt
5
1. Using the
capsula® JR
S. 6 You have purchased the
capsula® JR
S. 7
We thank you for your trust. Please note, that the optimum safety characteristics can only be achieved, if the
S. 8
seat is used properly according to instructions. Therefore we ask you to ensure the correct installation of the seat
S. 8 in your vehicle by reading the operating instructions carefully. Please keep instructions always with the seat for
further information.
S. 10
Only to be assembled by adults!
Recommendation:
recommends to use the
capsula®
and up (Group III).
1.1. Preparation (fi g.1)
4
The may be placed on all passenger seats of the vehicle that are equipped with a three-point-
capsula® JR
vehicle-belt. The child seat must not be positioned on a vehicle seat, which only has a lap belt (O), example
given the centre back seat of cars with three seats in the back.
1.2. Three-point-vehicle-belt confi guration (fi g.3)
The tree-point-belt of a vehicle is made of 4 parts: the lap belt (O), the diagonal belt (N), the belt latch (P) and
the belt buckle (Q).
4 as a child car seat
4
car seat for your child.
4
booster seat for children with a weight of 22 kg
capsula® JR
English
GB
6