Table of Contents
Advertisement
23. Insert the external microphone.
24. It changes into the external-microphone.
It confirmed that the file no. advances.
25. Record a sound source signal (L: 400Hz, R: 1kHz/1mV) from external microphone.
26. Press the [REW] switch.
27. Check the display of LCD is displayed as shown below.
(The File No. is displayed)
· Note: Please delete everything and start over from scratch when the number of files is different.
28. Remove the external microphone.
29. Press the [VOL -] switch.
The sound recorded by item.17 is reproduced.(Vol.:max.)
30. The time counter of LCD advances and it checks that sound comes out from the speaker.
31. Press the [VOL -] switch.
The sound recorded by item.21 is reproduced.
32. The time counter of LCD advances and it checks that sound comes out from the speaker.
All manuals and user guides at all-guides.com
Fig.11
Fig.12
Fig.13
Fig.14
9
RR-US475E
Advertisement
Table of Contents
