Summary Of Reports And Lists - Canon PIXMA MX310 series Quick Start Manual

Summary of Reports and Lists

The table below shows the reports and lists that can be printed from the machine. Refer to the pages
indicated for more details.
Report Or List
Activity report
Coded speed dial list
User's data list
Memory list
TX (Transmission) report Confirms whether a transmission was completed successfully. If
RX (Reception) report
Activity Report
Prints the history of sent and received faxes. The machine is factory-set to print an Activity report
after every 20 transactions. You can also disable automatic printing of this report, or print it
manually.
Note
For details on the Activity report setting, refer to "ACTIVITY REPORT" in "FAX SETTINGS" of the
User's Guide on-screen manual.
Printing the Activity Report Manually
1
Press the FAX button, then press the Menu button.
2
Press the [ or ] button to select PRNT REPORT/LIST, then press the OK button.
3
Press the [ or ] button to select ACTIVITY REPORT, then press the OK button.
The Activity report is printed.
Description
Shows recent fax transactions performed by your machine.
See "Activity Report" on page 57.
Lists the numbers and names registered for coded speed dialing.
See "Printing a List of the Registered Destination" on page 40.
Lists the current settings of the machine and the registered
sender information.
See "User's Data List" on page 58.
Lists the documents currently stored in the machine's memory.
See "Document Stored in Memory" on page 54.
enabled, prints after each fax transmission.
See "TX Report" on page 58.
Confirms whether a reception was completed successfully. If
enabled, prints after each fax reception. See "RX Report" on
page 58.
Faxing 57