BASSFACE IndyS8/2RK Instruction Manual

BASSFACE IndyS8/2RK Instruction Manual

12" 2x2ohm dvc 20cm subwoofer recone kit

Advertisement

IndyS8/2RK 12" 2x2Ohm DVC 20cm
Subwoofer Recone Kit
Instruction manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IndyS8/2RK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BASSFACE IndyS8/2RK

  • Page 1 IndyS8/2RK 12" 2x2Ohm DVC 20cm Subwoofer Recone Kit Instruction manual...
  • Page 2 Thank you for choosing Bassface. From the simplest connector to our top of the range amplifier - every element of these products has been designed to give you the best possible performance for your money. Please take the time to read these instructions carefully as they contain useful and important information.
  • Page 3 Begin by removing the old cone and coil from the woofer. Use a sharp knife, carefully cutting the surround, spider and tinsels. You can also use a heat gun (carefully!) to warm the parts to around 110 degrees. This will soften the adhesive sufficiently to strip the speaker without cutting.
  • Page 4 fit the dust cap we recommend to use strips of masking tape in closely arranged straight lines to form a circular mask - this will prevent excess glue from containing the new cone. Apply an even bead of adhesive and make sure the dust cap is pressed on centrally and firmly.

Table of Contents