Download Print this page
DeLonghi TCH 8993ER.BC Quick Start Manual

DeLonghi TCH 8993ER.BC Quick Start Manual

Advertisement

Quick Links

IMPORTANT SAFEGUARDS
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
- The appliance must not be placed im-
mediately under a fixed power socket.
- Do not use the appliance near show-
ers, bathtubs, sinks, swimming pools,
etc.
- If the power cable is damaged, it must
be replaced by the manufacturer, an
authorised service centre or a qualified
electrician in order to eliminate all risk.
Important!
Failure to observe the warning could result in injury or dam-
age to the appliance.
- This appliance can be used by children
aged from 8 years and above and per-
sons with reduced physical, sensory or
mental capabilities or lack of experi-
ence and knowledge if they have been
given supervision or instruction con-
cerning use of the appliance in a safe
way and understand the hazards in-
volved. Children shall not play with the
appliance. Cleaning and user mainte-
nance shall not be made by children
without supervision.
- Children of less than 3 years should be
kept away unless continuously super-
vised.
- Children aged from 3 years and less
than 8 years shall only switch on/off
the appliance provided that it has been
placed or installed in its intended nor-
mal operating position and they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children aged from 3 years
and less than 8 years shall not plug
in, regulate and clean the appliance or
perform user maintenance.
CAUTION — Some parts of this
product can become very hot and
cause burns. Particular attention
has to be given where children
and vulnerable people are pres-
ent.
- ATTENTION: To avoid the safety sys-
tem resetting accidentally, this appli-
ance must not be powered through
an external on/off device such as a
timer, or connected to a circuit which
is turned off and on regularly by the
energy supplier.
- Do not use the appliance in small
rooms when they are occupied by per-
sons that are not capable of leaving
the room, unless constant supervision
is provided.
Danger of burns!!
Failure to observe the warning could result in burns or scalds.
- WARNING: To avoid overheat-
ing, never under any circum-
stances cover the appliance
during operation as this would lead to
a dangerous rise in temperature.
Please note:
This symbol indicates recommendations and important infor-
mation for the user.
-
Always use the appliance in an upright position.
-
The use of extension leads is not recommended.
However if they cannot be avoided, follow the instruc-
tions accompanying the extension lead and never ex-
ceed the power limit marked on the extension.
-
The heater must be positioned at least 50 cm from furni-
ture or other objects.
-
Do not use the appliance in rooms with a floor area of
2
less than 4m
.
-
Before putting the appliance away, make sure it is com-
pletely off and unplugged from the mains socket. Wrap
9

Advertisement

loading
Need help?

Need help?

Do you have a question about the TCH 8993ER.BC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DeLonghi TCH 8993ER.BC

  • Page 1 IMPORTANT SAFEGUARDS and less than 8 years shall not plug in, regulate and clean the appliance or Danger! perform user maintenance. Failure to observe the warning may result in life threatening CAUTION — Some parts of this injury by electric shock. product can become very hot and - The appliance must not be placed im- cause burns.
  • Page 2 the cable around the base. Electrical connection Do not store in dusty atmospheres. Before plugging the appliance into the mains socket, Do not rest anything on the appliance. check that the mains power supply corresponds to the Do not use the appliance to dry laundry. Do not obstruct value indicated on the rating plate and that the mains the air intake and outlet grilles (danger of overheating).
  • Page 3 The appliance operates at minimum power, automati- then wait a few seconds for the setting to be memorised. cally reducing energy consumption and noise level. The The current settings are displayed again, together with the tones emitted by the commands are lower than in other symbol indicating that the timer has been set.
  • Page 4 TROUBLESHOOTING PROBLEM CAUSE SOLUTION Temperature sensor is not working Please contact Customer Service PF display and emits a beep properly Product doesn’t turn on Check that the plug is connected to the Plug in outlet Auto-start is on Wait till time elapsed or press the but- ton (E) twice to cancel the auto-start and push the button (A) Room temperature reaches the set...