Configuring The Advanced Settings (Advanced Setup Menu); Basic Operation Of The Advanced Setup Menu; Advanced Setup Menu Items - Yamaha RX-V685 Owner's Manual

Configuring the advanced settings (ADVANCED SETUP menu)

Basic operation of the ADVANCED SETUP menu

Perform the following basic procedure to operate the "ADVANCED SETUP" menu while
viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z (power).
z
(MAIN ZONE)
PROGRAM STRAIGHT
The top item and its setting of the "ADVANCED SETUP" menu appear on
the front display.
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on
again.
This completes the settings.
NOTE
For details on the default settings, see the following:
▪ "Default settings of the ADVANCED SETUP menu" (p.185)

ADVANCED SETUP menu items

Use the following table to configure system settings of the unit.
Item Function
SP IMP. Changes the speaker impedance setting.
REMOTE ID Selects the unit's remote control ID.
(Asia and General models only)
TU
Changes the FM/AM tuning frequency setting.
TV FORMAT Switches the video signal type of HDMI output.
MON.CHK Removes the limitation on HDMI video output.
4K MODE Selects the HDMI 4K signal format.
Selects the information to be sent to the BD player connected to
DTS MODE
the unit about the DTS formats that the unit supports.
BKUP/RSTR Backups and restores all the settings for the unit.
INIT Restores the default settings.
UPDATE Updates the firmware.
VERSION Checks the version of firmware currently installed on the unit.
136
En
Page
p.137
p.137
p.137
p.137
p.138
p.138
p.139
p.139
p.140
p.140
p.140