Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items; Changing The Speaker Impedance Setting (Sp Imp.) - Yamaha RX-V383BL Owner's Manual

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z (power).
z (power)
PROGRAM STRAIGHT
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on
again.
The new settings take effect.

ADVANCED SETUP menu items

Note
Default settings are underlined.
Item Function
(U.S.A. and Canada models only)
SP IMP.
Changes the speaker impedance setting.
REMOTE ID Selects the unit's remote control ID.
(Asia, Taiwan and General models only)
TU
Changes the FM/AM tuning frequency setting.
TV FORMAT Switches the video signal type of HDMI output.
4K MODE Selects the HDMI 4K signal format.
INIT Restores the default settings.
UPDATE Updates the firmware.
VERSION Checks the version of firmware currently installed on the unit.

Changing the speaker impedance setting (SP IMP.)

(U.S.A. and Canada models only)
LINK MASTER
OUT 2 Hi -R es ENHANCER
ECO
SP IMP.••8¬MIN
Change the unit's speaker impedance settings depending on the impedance of the
speakers connected.
Settings
6 Ω MIN Select this option when you connect 6-ohm speakers to the unit.
8 Ω MIN Select this option when you connect 8-ohm or higher speakers to the unit.
66
En
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
Page
p.66
p.67
p.67
p.67
p.68
p.68
p.68
p.68