Configuring The Volume Automatically Based On The Ypao Measurement Results - Yamaha RX-V685 Owner's Manual

Configuring the volume automatically based on the
YPAO measurement results
n
Adjusting the high- and low-frequency levels
automatically according to the volume
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and low-
frequency levels are automatically adjusted according to the volume so that you can
enjoy natural sounds even at low volume. YPAO Volume works effectively after the
YPAO measurement. For details, see the following:
• "Optimizing the speaker settings automatically (YPAO)" (p.38)
Option menu
"YPAO Volume" > "YPAO Volume"
Settings
Off Disables YPAO Volume.
On Enables YPAO Volume.
NOTE
We recommend enabling both "YPAO Volume" and "Adaptive DRC" when you are listening at lower volumes
or at night. For details on "Adaptive DRC", see the following:
▪ "Adjusting the dynamic range automatically" (p.81)
n
Adjusting the dynamic range automatically
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
to the volume when "YPAO Volume" is set to "On". When "Adaptive DRC" is set to
"On", it is useful for listening to playback at a low volume at night.
Option menu
"YPAO Volume" > "Adaptive DRC"
Settings
Off The dynamic range is not automatically adjusted.
On Automatically adjusts the dynamic range.
NOTE
We recommend enabling both "YPAO Volume" and "Adaptive DRC" when you are listening at lower volumes
or at night. For details on "YPAO Volume", see the following:
▪ "Adjusting the high- and low-frequency levels automatically according to the volume" (p.81)
81
En