Table of Contents
Advertisement
To detach the arm/stand (VP348QG)
1.
Remove the covers on where the monitor and the arm meet.
2.
Remove the four (4) screws securing the arm to the rear of the
monitor.
3.
Detach the stand (arm and base) from the monitor.
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
2-4
28.8 kg (Screw size: M4 x 10 mm).
Chapter 3: General Instruction
Advertisement
Table of Contents
