Cleaning The Mesh Filters In The Water Supply Hose; Cleaning The Detergent Dispenser - Whirlpool FWFP710521WH GCC User Manual

User manual

CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE

1 .
Close water tap and unscrew the inlet hose .
2 .
Clean the mesh filter at the hose's end carefully with a
fine brush .

CLEANING THE DETERGENT DISPENSER

1 .
Remove the detergent dispenser by pressing on the
release button and at the same time pulling out the
detergent dispenser .
2 . Remove the insert from the softener compartment .
1
2
1
2
3 .
Now unscrew the inlet hose on the back of the washing
machine by hand . Pull out the mesh filter from the valve
on the back of the washing machine with pliers and
carefully clean it .
4 .
Insert the mesh filter again . Connect the inlet hose to
water tap and washing machine again . Do not use a tool
to connect the inlet hose . Open the water tap and check
that all connections are tight .
3 .
Clean all parts under running water, removing all
detergent or softener residues .
4 . Wipe the parts dry with a soft cloth .
5 . Reinstall the detergent dispenser and push it back into
the detergent compartment .
EN
2
1
13