Related Manuals for RSP ROW SPPINING
Summary of Contents for RSP ROW SPPINING
- Page 1 Installation and User Instructions RSP ROW SPPINING MADE IN SPAIN Inercial Performance S.L. www.einercial.com...
-
Page 2: Table Of Contents
Table of Contents Introduction........................3 Standard equipment.....................3 Installation........................4-6 Adjusting the handle position..................7 Adding Weights to the Flywheel..................8 Technical Specifications....................9 Accessories….……......................9 Use.....…..……......................9 Maintenance.......................10 Replacing the rope.....................10 Warranty…..……….......................11... -
Page 3: Introduction
RSP ROW SPINNING has an axle specifically designed to accelerate in the first phase of the push, a defining moment to improve the speed of the boat and its performance. - Page 4 INSTALATION Parts of the machine. flywheel masses chassis pulley footrest seat structure...
-
Page 5: Installation
ROW SPPINING. Components The fixing screws to be mounted will be: 5 units The tool required to carry out the assembly will only be a 4 mm Allen key. RSP ROW SPINNING. Instalation ¡WARNING!: If the screws are not in place and the upper part is only in position, there is a risk of the upper part tipping over. - Page 6 The spring-loaded keyways The spring-loaded keyways where the screws are to be threaded shall be positioned in their corresponding place. Before positioning the assembly on the structure, check that these have not moved and that they are correctly aligned with the marks made on the profile.
-
Page 7: Adjusting The Handle Position
The most important technical features of our RSP Row Sppining, how the rope is adjusted and how the pulleys and the rope are changed. We also explain how to improve it and give you some useful tips. -
Page 8: Adding Weights To The Flywheel
Place the mass right Press inward Until it is in line with the flywheel The RSP conic flywheel comes with four masses to modify the force/speed parameters. The flywheel has four locations to add or delete steel weights in opposite pairs. Placement... -
Page 9: Technical Specifications
It is important to keep the unattended children away from the machine. The blocks and the ropes are elements of wear for the use of the machine. RSP recommends the use of his blocks and ropes to guarantee the ideal functioning of the machines Maximum weight of user 200 kg. -
Page 10: Maintenance
Do not leave machine in very humid places. Indoor use. Replace the rope if it is worn or broken, the blocks and the ropes are elements of wear by the use of the machine. Spare parts: https://einercial.com/categoria-producto/rsp-row-spinning/ Call for assistance if required. +34 659910685 REPLACING THE ROPE http://bit.ly/RSProwtechnician... -
Page 11: Warranty
WARRANTY 1. Inercial Performance, S.L. warrants to the purchaser that RSP conic is free of defects in materials and workmanship under normal use and maintenance, has a limited warranty of 2 years from the date of purchase, subject to the terms and conditions that marks the Spanish law,... - Page 12 RSP ROW SPPINING is manufactured in Spain. www.einercial.com Inercial Performance S.L. Avd. Val Miñor, 46 1ºC 36350 Nigrán (Pontevedra) Telf + 34 659910685 Spain...
Need help?
Do you have a question about the ROW SPPINING and is the answer not in the manual?
Questions and answers